{"id":336,"date":"2014-08-30T00:17:03","date_gmt":"2014-08-30T00:17:03","guid":{"rendered":"http:\/\/zulfikar.co.uk\/blog\/?p=336"},"modified":"2018-03-21T17:42:16","modified_gmt":"2018-03-21T17:42:16","slug":"magic-a-fujitsu-celvin-q802-into-a-qnap-ts-469-pro","status":"publish","type":"post","link":"http:\/\/zulfikar.co.uk\/blog\/magic-a-fujitsu-celvin-q802-into-a-qnap-ts-469-pro\/","title":{"rendered":"Magic a Fujitsu Celvin Q802 into a QNAP TS-469 Pro"},"content":{"rendered":"<p>Welcome fellow NAS enthusiasts.<\/p>\n<p>A Fujitsu Celvin Q802 (much like previous Celvin models) is simply a rebranded QNAP model with a firmware modification. In this instance the Fujitsu firmware limits some of the features of the equivalent QNAP firmware such as the HDMI out found on TS-x69 models.<\/p>\n<p>First of all confirm that you do indeed have a Q802 in your posession, the back ports layout should be exactly as this:<\/p>\n<figure id=\"attachment_338\" aria-describedby=\"caption-attachment-338\" style=\"width: 300px\" class=\"wp-caption aligncenter\"><a href=\"http:\/\/zulfikar.co.uk\/blog\/wp-content\/uploads\/2014\/08\/TS469L_hw-e1409353383985.jpg\"><img loading=\"lazy\" decoding=\"async\" class=\"size-medium wp-image-338\" src=\"http:\/\/zulfikar.co.uk\/blog\/wp-content\/uploads\/2014\/08\/TS469L_hw-e1409353383985-300x209.jpg\" alt=\"Rear of Q802\/TS-469\" width=\"300\" height=\"209\" srcset=\"http:\/\/zulfikar.co.uk\/blog\/wp-content\/uploads\/2014\/08\/TS469L_hw-e1409353383985-300x209.jpg 300w, http:\/\/zulfikar.co.uk\/blog\/wp-content\/uploads\/2014\/08\/TS469L_hw-e1409353383985.jpg 519w\" sizes=\"(max-width: 300px) 100vw, 300px\" \/><\/a><figcaption id=\"caption-attachment-338\" class=\"wp-caption-text\">Rear of Q802\/TS-469<\/figcaption><\/figure>\n<p>Notice the HDMI out port at top and the <strong><span style=\"color: #0000ff;\">USB3<\/span><\/strong> and USB2 ports. The front of your NAS will also have an <span style=\"color: #3366ff;\">LCD config\/notification screen<\/span>. This all confirms you have the right model.<\/p>\n<p>OK, before you begin you need some tools to get going:<\/p>\n<ul>\n<li>A USB keyboard, USB mouse, a monitor with VGA port to attach to the NAS<\/li>\n<li>A totally different computer to create the bootable USB and later to run QFinder and the web control panel (pref Windows 7)<\/li>\n<li>Grab a spare USB stick (at least 1GB) and be sure that you do not need anything off it as it will be formatted<\/li>\n<li>Download the factory firmware file &#8220;<strong>F_TS-469_20140516-1.2.8.img<\/strong>&#8221; (approx 503MB) for the TS-469 from here <a href=\"http:\/\/eu1.qnap.com\/Storage\/tsd\/fullimage\/F_TS-469_20140516-1.2.8.img\" rel=\"nofollow\">http:\/\/eu1.qnap.com\/Storage\/tsd\/fullimage\/F_TS-469_20140516-1.2.8.img<\/a><\/li>\n<li>Download the &#8220;<strong>Universal-USB-Installer-1.9.5.5.exe<\/strong>&#8221; from <a href=\"http:\/\/www.pendrivelinux.com\/universal-usb-installer-easy-as-1-2-3\/\">http:\/\/www.pendrivelinux.com\/universal-usb-installer-easy-as-1-2-3\/<\/a> so you can create a bootable Linux USB<\/li>\n<li>Download the Precise Puppy Linux 5.7.1 ISO file &#8220;<strong>precise-5.7.1.iso&#8221;<\/strong> (or any stable version) from here <a href=\"http:\/\/distro.ibiblio.org\/quirky\/precise-5.7.1\/\" target=\"_blank\" rel=\"noopener\">http:\/\/distro.ibiblio.org\/quirky\/precise-5.7.1\/<\/a><\/li>\n<\/ul>\n<p>Run the Universal-USB-Installer-1.9.5.5.exe progamme, there is no need to install it just click &#8216;<strong>I Agree<\/strong>&#8216; on the EULA. Then do the following:<\/p>\n<ul>\n<li>Step 1 From the drop down list choose &#8216;<strong>Precise Puppy<\/strong>&#8216; under the Puppy Linux section<\/li>\n<li>Step 2 Browse to the local file &#8216;<strong>precise-5.7.1.iso<\/strong>&#8216;<\/li>\n<li>Step 3 Make sure you <strong>select the correct USB Drive letter<\/strong> (very important!), select the Format box too<\/li>\n<li>Finally click <strong>create<\/strong>, this creates the USB Linux OS boot drive for you<\/li>\n<\/ul>\n<p>Don&#8217;t remove the USB stick just yet.<\/p>\n<ul>\n<li>Copy the &#8216;<strong>F_TS-469_20140516-1.2.8.img<\/strong>&#8216; firmware file to the USB stick<\/li>\n<li>On the USB stick rename the firmware file you just copied to simply &#8216;<strong>dom.img<\/strong>&#8216;<\/li>\n<li>Now you can safely eject the USB stick from your computer<\/li>\n<\/ul>\n<p>Pick up the USB stick and take it to your NAS drive.<\/p>\n<ul>\n<li>Ensure the NAS is switched <strong>off<\/strong><\/li>\n<li>Ensure you have <strong>removed<\/strong> ALL disk drives from your NAS.<\/li>\n<li><strong>Plug in<\/strong> the keyboard, mouse and attach the monitor to the VGA port.<\/li>\n<li>Plug in a <strong>network cable<\/strong>, ensure your router will allocate a DHCP address<\/li>\n<li>Plug in the <strong>USB stick<\/strong> to any of the available USB 2.0 ports on the back (2 of them should be in use by your keyb\/mouse)<\/li>\n<\/ul>\n<p>Switch on your NAS and allow it to boot into Precise Puppy, wait a few minutes. Once in the GUI the fun really starts.<\/p>\n<p>Close off any windows that pop up by clicking OK\/Kill until you can see the Puppy desktop. Don&#8217;t worry about localisation settings.<\/p>\n<p>Locate the console\/terminal icon in top left of Puppy desktop. Double click it to launch a terminal shell session.<\/p>\n<p><strong>REMEMBER<\/strong>: You may need to turn off Num Lock as it is enabled in the NAS BIOS by default!<\/p>\n<p>Type in these commands at the shell prompt:<\/p>\n<p><strong>sudo su<\/strong><\/p>\n<p><strong>fdisk -l<\/strong><\/p>\n<p>Look at the list of drives displayed, your USB stick will be SDB (\/dev\/sdb) and the NAS Local Flash Storage will be SDA (\/dev\/sda). <span style=\"color: #ff0000;\">YOUR USB may use a different mount point e.g. \/DEV\/SDB1 or SDB2 etc.!<\/span> We will confirm this in the following step, first you need to create a new folder, do this:<\/p>\n<p><strong>mkdir usbdrive<\/strong> <em>(this creates a new folder in \/root called &#8216;usbdrive&#8217;)<\/em><\/p>\n<p><strong>mount \/dev\/sdb \/root\/usbdrive<\/strong> <em>(this mounts your USB stick to the usbdrive folder we created)<\/em><\/p>\n<p><strong>cd \/root\/usbdrive<\/strong> <em>(changes directory to the usbdrive directory)<\/em><\/p>\n<p>type in <strong>ls<\/strong> to list directory and confirm you can see <strong>dom.img<\/strong> in the list. If you can then SDB is definitely your USB stick and SDA is your NAS local storage drive. Only if you <span style=\"text-decoration: underline;\">cannot<\/span> see dom.img or any contents of you USB stick then the drives are the other way around. Shutdown, boot up again and reverse the volumes in the instructions above.<\/p>\n<p>Finally you need to copy <strong>dom.img<\/strong> to the NAS local storage drive, type in this command:<\/p>\n<p><strong>cp dom.img \/dev\/sda<\/strong> <em>(copies dom.img to the NAS local storage)<\/em><\/p>\n<p>That&#8217;s it. Shut down your NAS. Before you boot it back up, first REMOVE THE USB DRIVE, then start your NAS and see if it takes the firmware. On the monitor, after the BIOS screen you should see 1 or 2 single digits on the top left. Shortly after you should see the screen as below and hear some beeps:<\/p>\n<figure id=\"attachment_343\" aria-describedby=\"caption-attachment-343\" style=\"width: 300px\" class=\"wp-caption aligncenter\"><a href=\"http:\/\/zulfikar.co.uk\/blog\/wp-content\/uploads\/2014\/08\/qnap_screen.jpg\"><img loading=\"lazy\" decoding=\"async\" class=\"size-medium wp-image-343\" src=\"http:\/\/zulfikar.co.uk\/blog\/wp-content\/uploads\/2014\/08\/qnap_screen-300x196.jpg\" alt=\"qnap boot screen\" width=\"300\" height=\"196\" srcset=\"http:\/\/zulfikar.co.uk\/blog\/wp-content\/uploads\/2014\/08\/qnap_screen-300x196.jpg 300w, http:\/\/zulfikar.co.uk\/blog\/wp-content\/uploads\/2014\/08\/qnap_screen.jpg 640w\" sizes=\"(max-width: 300px) 100vw, 300px\" \/><\/a><figcaption id=\"caption-attachment-343\" class=\"wp-caption-text\">qnap boot screen<\/figcaption><\/figure>\n<p>The LCD screen should show &#8216;<strong>Ready for Test Ver 1.2.8<\/strong>&#8216; and eventually on the desktop monitor display you are prompted with a login screen (<em>admin\/admin<\/em> if you really want to!). At this point the fan will be very noisy, ignore it.<\/p>\n<p>Don&#8217;t panic if nothing happens. You might have to do the whole copy <strong>dom.img<\/strong> file process again. It didn&#8217;t work until my 3rd attempt. Don&#8217;t ask me why!<\/p>\n<p>Once you have the factory firmware 1.2.8 running and can see the logon prompt place a SINGLE hard disk drive into HDD1 caddy (yes, its fine if you do it hot!).<\/p>\n<p>You can now move to your computer. Download and install <strong>QNAPQfinderWindows-4.2.1.0722.exe<\/strong> or if you wish get the latest version from <a title=\"QNAP Finder Software\" href=\"%20http:\/\/www.qnap.com\/v3\/uk\/product_x_down\/product_down_cat.php?csn=4&amp;p_cat=1\">http:\/\/www.qnap.com\/v3\/uk\/product_x_down\/product_down_cat.php?csn=4&amp;p_cat=1<\/a>.<\/p>\n<p>Additionally from the official QNAP support page for the TS-469 download a slightly older non-factory firmware, I downloaded <strong>TS-469_20130816-3.8.4.img<\/strong> to my local disk. I know other people have tried direct to firmware <strong>4.1.0<\/strong> with success, so you may wish to try that directly. I was being extra cautious in my procedure. We will use the Qfinder or Web Interface to install the firmware update.<\/p>\n<p>Launch QNAP finder and let it locate your NAS drive.<\/p>\n<p><a href=\"http:\/\/zulfikar.co.uk\/blog\/wp-content\/uploads\/2014\/08\/Screenshot_1.jpg\"><img loading=\"lazy\" decoding=\"async\" class=\"aligncenter size-medium wp-image-345\" src=\"http:\/\/zulfikar.co.uk\/blog\/wp-content\/uploads\/2014\/08\/Screenshot_1-300x204.jpg\" alt=\"Screenshot_1\" width=\"300\" height=\"204\" srcset=\"http:\/\/zulfikar.co.uk\/blog\/wp-content\/uploads\/2014\/08\/Screenshot_1-300x204.jpg 300w, http:\/\/zulfikar.co.uk\/blog\/wp-content\/uploads\/2014\/08\/Screenshot_1-1024x699.jpg 1024w, http:\/\/zulfikar.co.uk\/blog\/wp-content\/uploads\/2014\/08\/Screenshot_1.jpg 1041w\" sizes=\"(max-width: 300px) 100vw, 300px\" \/><\/a><\/p>\n<p>Please <span style=\"text-decoration: underline;\"><strong>IGNORE<\/strong> <\/span>the pop-up prompt to update to latest version 4.x of firmware, we&#8217;re going to take a gradual approach [Please see Update below].<\/p>\n<p>Notice as a curiosity that the MAC address shows up as 00-00-00-00-00-00. <em><strong>NOTE:<\/strong><\/em> <em>This may be just my own setup, because the same network card\/MAC was previosuly part of my home network while this NAS was still a Celvin Q802; it was setup as a DHCP port reservation on a .11 address.<\/em><\/p>\n<p>Complete the basic configuration as prompted, I chose the manual setup, gave my NAS a new name (CONQUEROR) &amp; and left it as JBOD single disk. Once these initial tasks were complete I tried to update the firmware from QFinder but it repeatedly failed and the connectivity was unstable for an unknown reason. I switched to the browser interface (how? right click on your NAS in QFinder and choose the browser option! OR browse directly to http:\/\/<strong>your_NAS&#8217;s_IP<\/strong>\/:8000) , chose <strong>System Settings &gt; Firmware Update,<\/strong> I selected <strong>Browse&#8230;<\/strong> and browsed to my local copy of the 3.8.4 firmware file &#8216;<strong>TS-469_20130816-3.8.4.img<\/strong>&#8216; and selected &#8216;<strong>Update System<\/strong>&#8216;. You can see the progress below:<\/p>\n<p><a href=\"http:\/\/zulfikar.co.uk\/blog\/wp-content\/uploads\/2014\/08\/Screenshot_8.jpg\"><img loading=\"lazy\" decoding=\"async\" class=\"aligncenter size-medium wp-image-344\" src=\"http:\/\/zulfikar.co.uk\/blog\/wp-content\/uploads\/2014\/08\/Screenshot_8-300x164.jpg\" alt=\"Screenshot_8\" width=\"300\" height=\"164\" srcset=\"http:\/\/zulfikar.co.uk\/blog\/wp-content\/uploads\/2014\/08\/Screenshot_8-300x164.jpg 300w, http:\/\/zulfikar.co.uk\/blog\/wp-content\/uploads\/2014\/08\/Screenshot_8-1024x562.jpg 1024w, http:\/\/zulfikar.co.uk\/blog\/wp-content\/uploads\/2014\/08\/Screenshot_8.jpg 1676w\" sizes=\"(max-width: 300px) 100vw, 300px\" \/><\/a><\/p>\n<p>It completed succesfully and the NAS rebooted. It took a while so be patient, but now the NAS was in a supported steady state and the connection via QFinder was far more stable. The fan also stopped being so LOUD, and the front LCD panel showed the normal information (NAS name, IP etc.). The correct MAC was also now displayed in QFinder.<\/p>\n<p>My final step was actually to accept the pop-up prompt to update the Firmware via QFinder to version 4.1.0, which it downloaded itself and applied to the NAS. After a reboot I was now running firmware 4.1.0 and the full <strong>Q<\/strong>nap<strong>T<\/strong>urbo<strong>S<\/strong>tation.<\/p>\n<p>I slammed in my other 3 SATA HDDs into slots 2,3 and 4. Then I configured my storage as I wanted. All done and happy!<\/p>\n<p>I&#8217;ve currently downloaded HD Station (XMBC and Chrome) and will experiment further.<\/p>\n<p>I&#8217;ve carved out a storage chunk for my own data (tonnes of Technet ISOs, Movies, Music and CBTs\/Tutorials) and a significant chunk as an iSCSI target for my 2 vSphere boxes.<\/p>\n<p><strong><span style=\"color: #ff0000;\">Update<\/span><\/strong><\/p>\n<p>You can actually update the firmware to the <strong>latest version<\/strong> once your QFinder locates your NAS and advises via the prompt to update to the latest firmware (even though I said to cancel the prompt). The issue that remains is that the DISK firmware is then out of sync with the NAS firmware. Once you have succesfully applied the latest firmware once, you will actually need to apply it AGAIN once you have all your disks back into the drive bays. This updates the DISK firmware to match the NAS. You will continue to get warnings in the web interface about the firmware mismatch until you do this.<\/p>\n<p>&nbsp;<\/p>\n<p>&nbsp;<\/p>\n","protected":false},"excerpt":{"rendered":"<p>Welcome fellow NAS enthusiasts. A Fujitsu Celvin Q802 (much like previous Celvin models) is simply&#8230;<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"jetpack_post_was_ever_published":false,"_jetpack_newsletter_access":"","_jetpack_dont_email_post_to_subs":false,"_jetpack_newsletter_tier_id":0,"_jetpack_memberships_contains_paywalled_content":false,"footnotes":"","_jetpack_memberships_contains_paid_content":false,"jetpack_publicize_message":"","jetpack_publicize_feature_enabled":true,"jetpack_social_post_already_shared":false,"jetpack_social_options":{"image_generator_settings":{"template":"highway","enabled":false}}},"categories":[175,10],"tags":[87,146,147,85,88,84,89,86,83,145,82],"jetpack_publicize_connections":[],"jetpack_featured_media_url":"","jetpack_shortlink":"https:\/\/wp.me\/p502c8-5q","jetpack_sharing_enabled":true,"jetpack_likes_enabled":true,"_links":{"self":[{"href":"http:\/\/zulfikar.co.uk\/blog\/wp-json\/wp\/v2\/posts\/336"}],"collection":[{"href":"http:\/\/zulfikar.co.uk\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/zulfikar.co.uk\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/zulfikar.co.uk\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/zulfikar.co.uk\/blog\/wp-json\/wp\/v2\/comments?post=336"}],"version-history":[{"count":14,"href":"http:\/\/zulfikar.co.uk\/blog\/wp-json\/wp\/v2\/posts\/336\/revisions"}],"predecessor-version":[{"id":350,"href":"http:\/\/zulfikar.co.uk\/blog\/wp-json\/wp\/v2\/posts\/336\/revisions\/350"}],"wp:attachment":[{"href":"http:\/\/zulfikar.co.uk\/blog\/wp-json\/wp\/v2\/media?parent=336"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/zulfikar.co.uk\/blog\/wp-json\/wp\/v2\/categories?post=336"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/zulfikar.co.uk\/blog\/wp-json\/wp\/v2\/tags?post=336"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}